Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 1

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 2

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 3

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 4

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 5

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 6

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM

Saita ayyuka da yawa a cikin ɗaya, babban aikin mu na lapping DN-D5Z yana da sauri kuma daidai, sanye take da canjin kayan aiki ta atomatik, injin yana da sauƙin amfani yayin da a lokaci guda yana da kwanciyar hankali mai kyau da tasiri daban-daban. Wanda aka ƙera shi don iyakar aiki da haɓaka aiki, injin niƙa haƙori na'ura ce mai ƙarfi, mai sauƙin amfani da injin haƙori wanda ke canza filin wasa don aikin likitan haƙori na rana guda - yana ba likitocin asibiti damar isar da ingantaccen kulawar haƙuri tare da matuƙar sauri da daidaito. An ƙera shi don haɗawa ba tare da matsala ba tare da kewayon hanyoyin CAD / CAM - kuma ya dace da niƙa inlays, onlays, rawanin, da sauran dawo da hakori - wannan rukunin milling yana saita sabbin ƙa'idodi idan ya zo ga abokantaka na mai amfani, yin haɗin kai da gaske ba tare da wahala ba.

GlobalDentex DN-D5Z ƙaramin injin niƙa busasshe ne mai tsawon axis 5 An ƙera shi don isar da daidaito na musamman a cikin zirconia, PEEK, da gyaran kakin zuma. Yana rage lokacin sarrafa kambi ɗaya zuwa ƙasa da mintuna 11 , yana aiki a matsayin cikakkiyar mafita mai inganci ga dakunan gwaje-gwajen hakori da kuma asibitocin kujera masu saurin aiki.

Zagaye Masu Sauri na Minti 11: Yana ƙara yawan amfani da wutar lantarki a kowace rana tare da sarrafa sauri don isar da kambi sau ɗaya.
Tafin Hannu da Aka Inganta a Benchtop: Ma'aunin kawai 470 × 500 × 465 mm , sanya benci na dakin gwaje-gwaje na yau da kullun ba tare da saman sararin masana'antu ba.
Shiru Mai Kyau ga Asibiti: Yana aiki a ƙaramin matakin amo na ~50 dB don kiyaye yanayi mai daɗi da kuma dacewa ga marasa lafiya.
Tsarin Aiki na Filogi-da-Play: Yana goyan bayan canja wurin bayanai ta hanyar Wi-Fi, Ethernet, ko USB ba tare da buƙatar canje-canje a fannin ababen more rayuwa ba.

Lambar Samfura.:

DN-D5Z

Alamar kasuwanci:

DNTX

Nau'in Niƙa:

Busasshe

Takaddun shaida:

CE, ISO13485

Biyan kuɗi:

T/T , L/C

Ranar isarwa:

15-40 kwanaki

Sharuɗɗan Ciniki:

EXW, FOB, CIF, DDU

bincike

Rubuta bita

Babban Amfanin

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 7

Minti 11–16 Kowanne Kambin Zirconia

Tsarin DN-D5Z mai saurin gudu da kuma ingantattun hanyoyin kayan aiki na axis 5 suna isar da cikakken kambin zirconia cikin mintuna 11 zuwa 16 - ma'aunin fitarwa wanda ke tallafawa ayyukan isar da kaya na rana ɗaya ba tare da yin watsi da daidaiton gefe ba.

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 8

Daidaiton Sake Matsayi 0.01 mm — Cikakken Rufe-Madauki

Duk gatari biyar suna aiki a ƙarƙashin ikon servo mai rufewa tare da sukurori na ƙwallo da aka riga aka ɗora, wanda ke ramawa ga ɗumamar zafi da kuma koma-baya na inji. Wannan shine bambanci tsakanin lakabin "axis 5" da aikin axis 5 wanda ke riƙe da haƙuri a duk lokacin da aka sami cikakken canjin samarwa.

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 9

Tsarin Aluminum Mai Girman Sama

An niƙa tsarin injin ɗin daga cikakken ƙarfe na aluminum - irin ƙayyadaddun kayan da ake amfani da su a cikin sassan sararin samaniya - yana ba da ƙarfi wanda ke hana kurakuran saman da girgiza ke haifarwa ko da a cikin saurin juyawa mai ƙarfi.

Kayan aikin hakori DN-D5Z Injin niƙa haƙori don CAD CAM 10

Canjin Mota na Kayan Aiki 8 — Babu Tsangwama ga Mai Aiki

Tare da buroshi 8 da aka ɗora a lokaci guda (0.5 mm, 1.0 mm, 2.0 mm, da kuma lebur 1.0 mm), DN-D5Z yana zaɓar kayan aiki ta atomatik kuma yana canza su ta hanyar niƙa. Dakunan gwaje-gwaje na iya tattara gyare-gyare da yawa a cikin wani aiki ba tare da tsayawa don sake cika kayan aikin ba.

~50 dB Aiki — Bene Mai Hayaniya a Asibiti

DN-D5Z na iya aiki a wuraren da ke gefen kujera ko kuma dakunan gwaje-gwaje ba tare da katsewar sauti ga marasa lafiya ko ma'aikata ba.

Haɗin kai mai sassauƙa - Babu kuɗin IT

Canja wurin fayilolin aiki ta hanyar Wi-Fi, Ethernet mai waya, ko USB. Babu buƙatar kayan aikin cibiyar sadarwa na musamman. Masu aiki suna zaɓar hanyar da ta dace da tsarin da suke da shi.

1 (45)

2 (15)

3 (14)

4 (7)

5 (7)

10 (2)

12 (2)

11 (2)

8 (2)

9 (2)

14 (2)

Sigogi

Nau'in kayan aiki	Injin pneumatic na tebur mai kusurwa 5
Kayan da suka dace (Faskoki φ98)	Zirconium oxide+PMMA+PEEK
Inganci	Minti 9 zuwa 16/kwamfuta
*XYZ Bugawa (a/mm)*	148x105x110
Kusur (a digiri)	A +30°/-145° B 0°～360°
Zafin aiki	20～40℃
Tsarin tuƙi na XYZAB	Motocin servo masu ƙananan matakai + Sukurori na ƙwallo
Daidaiton matsayi mai maimaitawa	±0.02mm
Wattage	Injin gaba ɗaya ≤ 1.0 KW
Ƙarfin madauri	180W
Gudun madauri	10000~40000r/min
Hanyar canza kayan aiki	Mai canza kayan aikin iska
Adadin mujallu	Huɗu
Diamita na riƙon wuka	￠4mm
Girman wuka	R1.0 R0.5 R0.25 R0.15
Matsayin hayaniya	～60dB(a wurin aiki)
Matsayin hayaniya	～35dB (yanayin jiran aiki)
Ƙarfin wutar lantarki	220V 50/60Hz
Nauyi	48Kg
Girman (mm)	50×41×43.5

Nunin samfurin da aka gama

Ta hanyar amfani da injin niƙa na DN-D5Z zirconia, masu amfani za su iya yin samfuran duk abin da suke buƙata.

28 (2)

26 (2)

Waɗanne buroshi ne suka dace, kuma ta yaya ake sarrafa kayan aiki?

Injin yana ɗaukar har zuwa bur 8 a lokaci guda - a diamita na 0.5 mm, 1.0 mm, 2.0 mm, da kuma kayan aiki mai faɗi na 1.0 mm. Canje-canjen kayan aiki suna aiki ta atomatik gaba ɗaya; tsarin sarrafawa yana zaɓar bur ɗin da ya dace bisa ga shirin niƙa ba tare da sa hannun mai aiki ba.

Ta yaya ake canja wurin bayanai na niƙa zuwa na'urar?

DN-D5Z yana goyan bayan hanyoyin canja wuri guda uku: Wi-Fi (mara waya), kebul na cibiyar sadarwa (Ethernet), da kuma kebul na USB flash drive. Wannan sassauci yana tabbatar da dacewa da kusan duk wani saitin IT na dakin gwaje-gwaje.

Waɗanne kayan aikin injin niƙa na DN-D5Z za su iya yi?

DN-D5Z yana goyan bayan busasshen niƙa na zirconia, toshewar kakin zuma, da PEEK, ta amfani da faifan diamita na 98 mm na yau da kullun a cikin kauri daga 10 zuwa 25 mm. Niƙa da jika (misali, gilashin-yumbu / lithium disilicate) ba a goyan bayan shi a cikin wannan tsari ba - idan dacewa da gilashi-yumbu wajibi ne, da fatan za a tabbatar da shi tare da ƙungiyar fasaha.